AKE · Elevator systems
Hospital and bed lifts
Hospital and bed lift planning considers the patient bed or stretcher together with accompanying people and equipment. H Line is the AKE family to explore for this application. Cabin and door dimensions need to fit the complete transfer route through the building. For project assessment, provide the actual bed or stretcher envelope rather than relying on a passenger count.
Models
Information for product selection
- State the bed or stretcher dimensions including equipment, accompanying people and total load.
- Show corridors, turning areas, door orientations and the transfer route on the floor plans.
- Describe operating demand and hospital requirements; confirm any special functions within the project assessment.
What matters when selecting a hospital bed or stretcher lift?
Assess the bed or stretcher together with equipment and accompanying people. When reviewing H Line, specify the total load and the transfer route between floors; a passenger count alone is not enough to describe the requirement. Confirm the intended bed or stretcher transport for the selected H Line configuration.
Which dimensions are needed for a hospital lift?
Provide the external dimensions of the bed or stretcher including equipment, and state cabin and door dimensions separately. Show corridors, turning areas and door orientations on the plans; cabin size alone does not confirm the complete transfer route.
How does a hospital bed lift differ from a passenger lift?
A passenger lift is sized for passenger traffic and building use. For a bed lift, also called a hospital elevator or stretcher lift, moving a bed or stretcher with accompanying staff and equipment determines the car and door dimensions. Compare the passenger lifts for visitor and staff traffic as well; the project defines which lift carries which task.
What information is needed to request a hospital lift?
Dimensioned floor plans and a section showing the stops and travel height, the external dimensions of the largest bed or stretcher including equipment, and the expected total load are the most useful starting point. Mark whether the building is new or existing and note known structural constraints. AKE states binding car or shaft dimensions only for the reviewed H Line configuration.
The guide to elevator dimensions explains how the car, door opening and shaft relate on the plan and section.
For clinics and care facilities, see lifts for healthcare buildings.
Discuss your project